TruSense S-Series Overview

trusense s-series

Introducing the TruSense S-Series laser sensors. These next generation laser sensors offers longer range, a more simplistic user interface and a smaller, compact design all at a lower price point.

LTI TruSense S100 Laser Sensor

The TruSense S-series (TruSense S100 & TruSense S200) laser sensors are user configurable, which means you can easily optimize their performance for your specific application. For example, you can set the measurement mode to Closest, Farthest or Strongest and quickly change the behavior of the laser sensor to best work in your particular environment.

You can also increase the averaging samples to capture a higher accuracy level of all your measurements. If you need to isolate the measurement within a particular range, you can set a short and long gate and program the laser to only compute values within that predetermined range.

 Apply an offset from the laser sensor and have unlimited flexibility with where you install your laser sensor. All these benefits will help produce the desired results you need within your specific environment. The superior engineering put into this laser sensor equates to a smaller, lighter, better performance laser sensor - all at a very competitive price.

For applications where a compact size and extremely light weight is a must, the TruSense series are a perfect fit. The OEM version (without an external case) weighs less than 3 ounces and takes up space that is no larger than a deck of cards. System integrators can easily install it into a small aircraft for height measurements or camera housing.

Small size does not limit the performance of these sensors as they will range to a gray target at over 1500 meters with accuracy up to 4 cm in short range mode. Having a choice of a variety of I/O formats makes the TruSense series very adaptable for your specific installation.
 
How the TruSense Laser Sensor Measures Up:
 
⦁    Easily identifies difficult targets such as liquids, non-reflective material and fast moving objects.
⦁    Makes non-contact and non-intrusive measurements without the need for frequent calibration.
⦁    Recognizes small targets at long distances, within narrow openings and from sharp angles.
⦁    Performs under temperature variations, background noise, vapor pressure and low dielectric or acoustically absorbing materials.

TruSense S Series Laser Sensors Specifications

Specifications     TruSense S-100    TruSense S-200
Min range 1.5 ft (0.46 m) 1.5 ft (46 cm)
Max range (To reflective target / To non-reflective target) 7,546 ft / 5,249 ft
(2,300 m / 1,600 m)
9,514 ft / 5,249 ft (2,900 m / 1,600 m) low-accuracy mode
4,921 ft / 2,953 ft (1500 m / 900 m) medium-accuracy mode
2,461 ft / 2,461 ft (750 m / 750 m) high- accuracy mode
Accuracy   3.3 ft (1 m)   0.1 ft (4 cm) short-range mode 0.3 ft (8 cm) medium-range mode 0.5 ft (15 cm) long-range mode
Data output rate     <1 to 6Hz < 1Hz to 14Hz; 200Hz mode (only with RS232)
Target modes     Closest, Farthest, Closest-Farthest, Strongest, First  First, Strongest, Last, First-second-third, Last-second-to-last, First-strongest-last, First-second
Optical and Electrical    
Wavelength 
 
905 nm (near IR) 905 nm (near IR)

Divergence  

 

 3 mrad (equal to 1 ft beam diameter @ 328 ft (30 cm @ 100 m) 3 mrad (equal to 1 ft beam diameter @ 328 ft (30 cm @ 100 m)
I/O
 
RS232   S-200 = TRIG, SDI12, RS232 w/o alignment laser
Input power 
 
8 - 11 VDC nominal6 - 12 VDC absolute (9VDC recommended) 12-24 VDC nominal 10-28 VDC absolute (12 VDC recommended)
Current draw   Measuring = 150 mA, Idle = 50 mA, Sleep = 30 mA    Measuring = 150 mA,
Standby = 40 mA
Physical    
Dimensions ( L x W x H)    4.11 x 3.22 x 1.64 (104.4 x 81.7 x 41.6 mm)  4.11 x 3.22 x 1.64 in (104.4 x 81.7 x 41.6
Weight Standard = 4.8oz (138.6g),
OEM = 2.7 oz (76 g)
 Standard = 4.8 oz (138.6 g)
OEM = 2.7 oz (76 g)
Housing and frame material   Glass filled polycarbonate  Glass filled polycarbonate 
Environmental    
Eye safety    Class 1, 7mm (FDA, CFR21) Class 1m (IEC 60825-1:2001)  Class 1, 7mm (FDA, CFR21) Class 1m (IEC 60825-1:2001)
Shock/Vibration    MIL-STD-810 MIL-STD-810
Moisture    IP54  IP54
Operating temperature      - 20° to 140° F (- 28 to 60° C)   - 20° to 140° F (- 28° to 60°

 

NOTE: All specifications are subject to change without notice. Rev 5.18.15.

 

For more information about the LTI TruSense S100 & S200 Laser Sensors, please contact us for pricing

Enquiry Now